Pimp my Prusa i3 – A 8$ trick to get a higher print quality with your Afinibot prusa

July 09, 2015

This simple and inexpensive tutorial will allow you to stabilise your Prusa i3 on a board using 3D printed hooks. Less vibration = better quality of prints and also with such stable base you will need to do the bed calibration less often.

https://electronicgeektips.wordpress.com/2015/07/09/pimp-my-prusa-i3-a-8-trick-to-get-a-higher-print-quality-with-your-afinibot-prusa/