This 12vDC Switching Power Supply is more than capable of powering RepRap electronics, motors and a heated bed. This power supply does not include any wires. You will need to purchase a heavy gauge grounded AC plug with cord.
PRODUCT ALERT (1)
These power supplies can be switched between 110VAC and 220VAC. If you are in North America make sure to set the switch on the side of the power supply to 110VAC. In most other regions of the world 220VAC should be used. You can find more information here.
1 power supply
3 positive terminals, 3 ground terminals, 1 set of AC terminals
110v or 220v AC capable
The 100k Epcos Thermistor can be used for temperature control for the PCB heated bed or any other temperature controls you may need. If using Sprinter firmware, select temperature table...
This stepper motor damper reduces the volume of the music your 3D printer makes down to a soft whisper. Works with: LulzBot Mini Features Install this stepper motor damper in between theLulzBot Mini Y-axis...
This Heat Bed Kit is a direct replacement for our LulzBot Mini heated bed. Designed for 3D printers powered by 24v power supplies, this heated bed heats rapidly and consistently...
The Pololu A4988 stepper motor driver is the new more robust design to the A4983 driver. The A4988 can be used with any pololu stepper driven Reprap electronics including all...