The Bed Plate is the upper part of the two part Y axis set. You will also need the Y-axis Plate and additional hardware listed below for Prusa Mendel, MendelMax, and AO-100 series 3D printer builds.
PRODUCT ALERT (1)
Additional materials needed:
Hardware is not included. You will need to source screws, nuts, and other hardware.
Works with: LulzBot AO-101 or AO-100
1 Machined aluminum bed plate
x4 30mm standoff for M5
x4 M5 x 45 BHCS
x4 M5 nyloc nut
Additional hardware for mounting bushings and print surface
This stepper motor damper reduces the volume of the music your 3D printer makes down to a soft whisper. Works with: LulzBot Mini Features Install this stepper motor damper in between theLulzBot Mini Y-axis...
This Heat Bed Kit is a direct replacement for our LulzBot Mini heated bed. Designed for 3D printers powered by 24v power supplies, this heated bed heats rapidly and consistently...
The 100k Epcos Thermistor can be used for temperature control for the PCB heated bed or any other temperature controls you may need. If using Sprinter firmware, select temperature table...
This nozzle is a direct swap or replacement for use on the Budaschnozzle 2.0 hot end. Choose the finer nozzle diameters for more detail on surface layers and thinner walls. Larger nozzle diameters...