These 10mm SDP/SI bronze bushings are a push fit bushing compatible with any of the 8mm or 10mm SDP/SI bushing holders. The bushings will fit into the SDP Type Bushing Holder and the X-Carriage for SDP Bushings and any other SDP/SI holders you can 3D print.
4 Bronze bushings
ID: 10.02mm or 8.02mm
Bushing material: Sintered Bronze
The 100k Epcos Thermistor can be used for temperature control for the PCB heated bed or any other temperature controls you may need. If using Sprinter firmware, select temperature table...
This stepper motor damper reduces the volume of the music your 3D printer makes down to a soft whisper. Works with: LulzBot Mini Features Install this stepper motor damper in between theLulzBot Mini Y-axis...
This Heat Bed Kit is a direct replacement for our LulzBot Mini heated bed. Designed for 3D printers powered by 24v power supplies, this heated bed heats rapidly and consistently...
This thermistor is a direct replacement for the thermistor used in the LulzBot Hexagon Hot End. Use this thermistor for applications at or below a temperature of 300℃. PRODUCT ALERT (1) Installation Warning Failure...