Unleash your inner electrical engineer with this exciting new premium 3D printing filament. Since 3D printed objects have varying structures within them, the resistance across the 3D printed object varies as well! The resistance of the 3D printed object can be different when measured across the sides of the object than the resistance when measured from the top to the bottom.
PRODUCT ALERT (2)
Due to the carbon powder blended into this filament, we strongly recommend using a LulzBot Tool Head with a .5mm nozzle for optimal 3D printing performance.
While our internal testing with the LulzBot Hexagon Hot End has not encountered measurable wear on the tool head, pay attention for any print quality changes.
Works with: LulzBot Mini, LulzBot TAZ 6, LulzBot TAZ 5, LulzBot TAZ 5 Hexagon, LulzBot TAZ 6 Hexagon, LulzBot Hexagon, LulzBot Budaschnozzle, LulzBot TAZ Dual Extruder, LulzBot TAZ FlexyDually
Use Conductive PLA filament for low-voltage printed-in-place applications such as contacts, switches, and even internal wiring traces. This premium 3D printing filament can also interact with some touch sensors and even touch screens.
Filament Diameter: 2.85 mm (0.11 inches)
Amount of Filament: 500g (1.1 lbs)
Average Length of Filament: 77 m
Filament color may vary
Estimated resistance of 3D printed parts when measured perpendicular to the layers along the X/Y axis: 30 ohm-cm
Estimated resistance of 3D printed parts when measured through the layers along the Z axis: 115 ohm-cm
Special Tool Head Requirements: LulzBot Hexagon Hot End with 0.50mm nozzle recommended
Hot End Temperature Range: 215°C-230°C
Print Surface: PEI film recommended
Print Surface Temperature: 60°C
Conductive PLA filament ships vacuum sealed and mounted on a reel.
PolyLite™ by Polymaker offers excellent 3D printing performance, a vibrant palette of colors, and will become your affordable, go-to choice. This premium filament 3D prints reliably and has minimal warping and...
nGen is engineered for prototyping and production. This co-polyester filament by colorFabb brings together the strength and precision found in Eastman Amphora™ 3300 3D polymer, optimized for desktop 3D printing. nGen handles...
PLA is one of the most commonly used filaments in 3D printing because it is so easy to use. PLA has minimal warping and shrinking compared to other materials, which...
Verbatim® PLA features vibrant colors and a smooth, glossy finish. PLA exhibits little-to-no warping and shrinking compared to other materials, which means it thrives when making larger objects featuring flat surfaces and hard angles, or...