This DSO138 digital oscilloscope kit adopts ARM Cortex-M3 processor and with 2.4-inch TFT screen. It's easy and reliable for circuit operation. It can display frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.
Note: This is the original kit from JYETech. Beware of conterfeit kit.
This kit uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.
Can be secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter, data loggers.
Adjustable vertical displacement, and with instructions.
With automatic, regular and one-shot modes, easy to capture the moment waveform.
Available rising or falling edge trigger.
Observable previous trigger waveform (negative delay).
Can freeze at any time waveform display (HOLD function).
Comes 1Hz /3.3V square wave test signal source.
With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.
Waveform storage function: will not lose the waveform after power off.
Short-circuit and open-circuit detection: can help the user find out the soldering error.
TFT controller recognition function.
This DIY kit is not soldered yet!
Maximum Real-time Sampling Rate: 1Msps
Sampling Buffer Depth: 1024 bytes
Analog Bandwidth: 0-200KHz
Vertical Sensitivity: 10mV / Div - 5V / Div (1-2-5 progressive manner)
Input Impedance: 1MΩ
Maximum Input Voltage: 50Vpp (1: 1 probe), 400Vpp (10: 1 probe)
Coupling Modes: DC / AC / GND
The Horizontal Time Base Range: 10μs / Div - 50s / Div (1-2-5 progressive manner)
Supply Voltage: DC 9V
PCB Size: 117 * 76mm / 4.6 * 3in
Screen Size: 52 * 40mm / 2 * 1.57in
Package Size: 18 * 12.5 * 3cm / 7.08 * 4.92 * 1.18in
Package Weight: 119g / 4.21oz
1 * DSO138 DIY Digital Oscilloscope Kit
1 * Probe
3 * User Manual(English)
PLUG AND PLAY WITH RASPBERRY PI 2 MODEL B ***YOU DON'T NEED TO INSTALL ANY DRIVERS*** : low-power ultra-Mini Wireless Network card 150Mbps Features: · MIMO technology improves data throughput...
-- The product is used to supply AC power into DC for iphone,Banana Pi,raspberry pi and so on FEATURES:-- Input: 100-240VAC 0.3A 50/60HZ;-- Output: 5V 2A;-- Micro USB Plug; COLOR:-- black;
Features:Built-in microphoneBuilt-in 6 white LEDExquisite appearance,high qualityAdvanced video-phone technologyEasy control LED light with the manual dimmer switchDesigned for both laptop and desktop360 degrees rotary function,all angle is availableAuto Exposure ControlAuto...
If you've ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. bi-directional logic level converter is a small device that...