Great 3D prints start with a good foundation. This assembled LulzBot™ TAZ Heat Bed Kit is a direct replacement for the LulzBot TAZ heated bed.
Works with: LulzBot TAZ 6, LulzBot TAZ 5, LulzBot TAZ 4
PEI print surface
A revolutionary new print surface that has been tested by the advanced members of the LulzBot community and has proved to be an easier and more reliable 3D printing surface. When cleaned and heated to the recommended temperatures, your print sticks well, the first time and releases from the heated bed once cooled.
Borosilicate Glass Bed
A large, 300 mm2 borosilicate glass sheet that not only spreads heat well, but is strong and made to withstand multiple heating and cooling cycles.
24v Silicone Heater
Designed for 3D printers powered by 24v power supplies, this heated bed heats rapidly and consistently for greater 3D printing performance.
Width (X) x Length (Y): 300mm x 300mm (11.8in x 11.8in)
Height (Z, Thickness): 1.016mm (0.040in)
24v Silicone Heater:
298mm x 298mm
8A - 10A
300mm x 300mmx 3.1 mm (1/8 in)
This stepper motor damper reduces the volume of the music your 3D printer makes down to a soft whisper. Works with: LulzBot Mini Features Install this stepper motor damper in between theLulzBot Mini Y-axis...
The 100k Epcos Thermistor can be used for temperature control for the PCB heated bed or any other temperature controls you may need. If using Sprinter firmware, select temperature table...
This Heat Bed Kit is a direct replacement for our LulzBot Mini heated bed. Designed for 3D printers powered by 24v power supplies, this heated bed heats rapidly and consistently...
The Pololu A4988 stepper motor driver is the new more robust design to the A4983 driver. The A4988 can be used with any pololu stepper driven Reprap electronics including all...