This stepper motor damper reduces the volume of the music your 3D printer makes down to a soft whisper.
Works with: LulzBot Mini
Install this stepper motor damper in between theLulzBot Mini Y-axis stepper motor mount and the stepper motor to reduce the sounds generated by your 3D printer. Install the damper on the Y-axis stepper motor. The damper has two sides: non-threaded holes for stepper motor mounting, and threaded mounting holes for the printer-side.
One (1) motor dampener
Recommended Installation: LulzBot Mini Y-axis
Compatible Mounting Specification: NEMA 17
Dampener Thickness: 6 mm
The 100k Epcos Thermistor can be used for temperature control for the PCB heated bed or any other temperature controls you may need. If using Sprinter firmware, select temperature table...
This Heat Bed Kit is a direct replacement for our LulzBot Mini heated bed. Designed for 3D printers powered by 24v power supplies, this heated bed heats rapidly and consistently...
The Pololu A4988 stepper motor driver is the new more robust design to the A4983 driver. The A4988 can be used with any pololu stepper driven Reprap electronics including all...
This nozzle is a direct swap or replacement for use on the Budaschnozzle 2.0 hot end. Choose the finer nozzle diameters for more detail on surface layers and thinner walls. Larger nozzle diameters...