These stepper motors feature a built in wiring connector for compatiblilty with both the LulzBot TAZ and the LulzBot Mini 3D printer. Two compatible wiring adapters are included, one for the LulzBot TAZ and one for the LulzBot Mini. This is a direct replacement for the stepper motor used on the LulzBot TAZ 6 desktop 3D printer, and also works with previous generations going back to the LulzBot TAZ 3.
PRODUCT ALERT (1)
This motor is not compatible with the left-hand side Z-axis motor on the LulzBot Mini 3D printer.
Works with: LulzBot Mini, LulzBot TAZ 6, LulzBot TAZ 5, LulzBot TAZ 4, LulzBot TAZ 3
1 Stepper Motor
1 wiring adapter compatible with the LulzBot TAZ 3-6
1 wiring adapter compatible with the LulzBot Mini
Mounting specification: NEMA 17
Rated Current: 1.5 A
Winding Resistance: 2.2 Ohms
Holding Torque: 88 oz/in
This Heat Bed Kit is a direct replacement for our LulzBot Mini heated bed. Designed for 3D printers powered by 24v power supplies, this heated bed heats rapidly and consistently...
The 100k Epcos Thermistor can be used for temperature control for the PCB heated bed or any other temperature controls you may need. If using Sprinter firmware, select temperature table...
This stepper motor damper reduces the volume of the music your 3D printer makes down to a soft whisper. Works with: LulzBot Mini Features Install this stepper motor damper in between theLulzBot Mini Y-axis...
The Pololu A4988 stepper motor driver is the new more robust design to the A4983 driver. The A4988 can be used with any pololu stepper driven Reprap electronics including all...